IRL4002
The wireless energy monitor is a full feature wireless energy monitor.

Its depth of features allows for users to measure both single phase and 3 phase supply. Additionally dual tariff electricity rates can be entered to match the actual costs you have from your provider.

A key feature is the ability to download both realtime and historical data onto your PC via the supplied PC link cable.

The display will show power, cost, as well as showing the real time figures it will show MTD, YTD, and daily high and low readings

IRL4002
Transmitter size 12cm x 7cm x 3cm
Display size 14cm x 9cm x 2.5cm
2 Transmitter batteries 'D' Cell
Mains adaptor powered display unit
230 volts 50 Mhz rated power supply
Wireless transmission 433 Mhz SRD band
Digital modulation
Maximum rated sensor current = 100amps
Current sensitivity = 50 mA
ERP = 5mW
Max cable size = 30mm
24 Rolling consumption bar graph display
LCD segmanted display
Clamp maximum 300A 600v
24 hour clock

IRL4002
The products consists of 3 main parts: a display unit, sensor clamps, and transmitter unit. The sensor is clipped around the main live cable between the electricity meter and the fuse box.
Data is then sent via the transmitter to the display unit.

The display unit will then show the data it receives in real time. You can easily input your current electricity price, the monitor will then show much you are spending on an hourly, daily and monthly basis. It is also possible to input two prices if you use off peak supply prices.

The monitor is supplied with a single sensor for single phase supply. It is possible to obtain additional sensors and connect then to the transmitter so you can monitor three phase supply.

The unit can store up to 4 years worth of data. This data can be downloaded onto a PC either directly via a hyper link terminal in windows, or via some simple software which you can download.